Hello,

You must set:
g_ssl_allow "*"
g_ssl_allow_imap "*"
on both machines to enable ssl.

Regards,
Stuart

On 17/02/2011 8:37 p.m., plear wrote:

Thanks Lyle,

I opened Port 110 on both ends. Now I get the following:

(I'm trying to mirror two machines over the internet.) SSL is NOT

disabled on either machine. Port 110 is open in both directions.

Mirror Status (MASTER) to (<SLAVE IP>) live

Add: 61 (0.0/s) live=0

Sent: 67 (0.0/s)

Queue: 0k 0.0%

Config: Feb 16 15:24:53

Resync: Total=22151 0.0, Resent=9840, Prune=0, Dirs=286 Th=5

State: OpenList2-NULL

Que: Done que 2 in 4 sec

LastErr: -ERR SSL Not allowed for ip (<MASTER IP>)

In: add=0 del=0 rename=0 fail=0 prune=0

Mirror Status (SLAVE) to (<MASTER IP>) live

Add: 2 (0.0/s) live=0

Sent: 0 (0.0/s)

Queue: 0k 0.0%

Config: Feb 17 00:25:41

Resync: No record of last resync command

State: Started 1

Que:

Info: 08:22 Open (<MASTER IP>) failed Operation now in progress 33 sec

In: add=9379 del=136 rename=45 fail=13 prune=0

Thank you.

Patrick

On Feb 9, 2011, at 7:23 PM, Lyle Giese wrote:

plear wrote:

Hi,

Mirroring won't start. I get an "open connection refused" on the

master. Here is the detail:

I have set up both the master and slave per

http://netwinsite..com/surgemail/help/mirror.htm and started the

mirror (on the master only) as follows:

issue "tellmail resync_config" on master (if using g_mirror_config)

issue "tellmail surgehost_update" on master

issue "tellmail resync_nwauth"' on master (if using nwauth)

issue "tellmail resync_fast" on master

When I issue the "tellmail status" command I get the following on the

MASTER

----------------------------------------------------------------------------

Mirror Status (MASTER) to (XXX.XXX.XXX.XXX [IP of slave]) live

Add: 7 (0.0/s) live=0

Sent: 0 (0.0/s)

Queue: 1395k 0.0%

Config: Feb 09 16:52:53

Open failed

State: Started 1

Que:

Info: 16:53 readline open Connection refused after 0 seconds

In: add=0 del=0 rename=0 fail=0 prune=0

----------------------------------------------------------------------------

Almost an hour after the above commands were given to the master, the

SLAVE shows this:

----------------------------------------------------------------------------

Mirror Status (SLAVE) to (XX.XX.XX.XX [IP of MASTER) live

Add: 0 (0.0/s) live=0

Sent: 0 (0.0/s)

Queue: 0k 0.0%

Config: Not since restart

Resync: No record of last resync command

State: Started 1

Que:

Info: 02:27 Open (XX.XX.XX.XX [IP of MASTER]) failed Operation now in

progress 33 sec

In: add=0 del=0 rename=0 fail=0 prune=0

----------------------------------------------------------------------------

Every time I repeat this, the time under "Info: " changes to the

current time for both the Master and Slave. Please disregard the wide

discrepancy in times - the machines are set to different time zones.

Any ideas as to why it is not starting?

Thank you.

Patrick

I believe that mirroring is done over tcp port 110. Could you have

firewall issues preventing them from talking on port 110? Can you telnet

to port 110 from the master to slave or vis-versa?

Lyle Giese

LCR Computer Services, Inc.

------------------------------------------------------------------------------------------

The problem with socialism is that you eventually run out of other

people's money.