Well, I guess this must mean that the mirror status only shows outbound updates and does not show any "incoming" which is why the SLAVE shows no activity?
On Feb 17, 2011, at 3:20 PM, Kevin Gagel wrote: It looks like its working to me... Kevin W. Gagel
Network Administrator
College of New Caledonia
(250)562-2131 local 5448
On Thursday 17/02/2011 at 3:11 pm, plear wrote:
Thanks Stuart. That was helpful! Unfortunately, I am not sure it works yet. Here's what I get now. Maybe you can tell from the status below?
Mirror Status (MASTER) to (<slave IP>) live config Add: 8 (0.0/s) live=2 Sent: 13 (0.0/s) Queue: 0k 0.0% Config: Feb 17 14:38:15 Resync: Total=22693 21.0, Resent=150, Prune=0, Dirs=167 Th=3 State: OpenList2-NULL Que: Done que 2 in 0 sec In: add=3 del=0 rename=0 fail=0 prune=0
Mirror Status (SLAVE) to (<master IP>) live config Add: 0 (0.0/s) live=0 Sent: 0 (0.0/s) Queue: 0k 0.0% Config: Feb 17 23:55:12 Resync: No record of last resync command State: OpenLink Que: Done que 6 in 4 sec Info: 00:06 Open (<master IP>) failed Operation now in progress 33 sec In: add=465 del=0 rename=6 fail=3 prune=0
On Feb 17, 2011, at 1:47 PM, SurgeMail Support wrote: Hello, You must set: g_ssl_allow "*" g_ssl_allow_imap "*" on both machines to enable ssl. Regards, Stuart On 17/02/2011 8:37 p.m., plear wrote:
Thanks Lyle,
I opened Port 110 on both ends. Now I get the following:
(I'm trying to mirror two machines over the internet.) SSL is NOT
disabled on either machine. Port 110 is open in both directions.
Mirror Status (MASTER) to (<SLAVE IP>) live
Add: 61 (0.0/s) live=0
Sent: 67 (0.0/s)
Queue: 0k 0.0%
Config: Feb 16 15:24:53
Resync: Total=22151 0.0, Resent=9840, Prune=0, Dirs=286 Th=5
State: OpenList2-NULL
Que: Done que 2 in 4 sec
LastErr: -ERR SSL Not allowed for ip (<MASTER IP>)
In: add=0 del=0 rename=0 fail=0 prune=0
Mirror Status (SLAVE) to (<MASTER IP>) live
Add: 2 (0.0/s) live=0
Sent: 0 (0.0/s)
Queue: 0k 0.0%
Config: Feb 17 00:25:41
Resync: No record of last resync command
State: Started 1
Que:
Info: 08:22 Open (<MASTER IP>) failed Operation now in progress 33 sec
In: add=9379 del=136 rename=45 fail=13 prune=0
Thank you.
Patrick
On Feb 9, 2011, at 7:23 PM, Lyle Giese wrote:
plear wrote:
Hi,
Mirroring won't start. I get an "open connection refused" on the
master. Here is the detail:
I have set up both the master and slave per
http://netwinsite.com/surgemail/help/mirror.htm and started the
mirror (on the master only) as follows:
issue "tellmail resync_config" on master (if using g_mirror_config)
issue "tellmail surgehost_update" on master
issue "tellmail resync_nwauth"' on master (if using nwauth)
issue "tellmail resync_fast" on master
When I issue the "tellmail status" command I get the following on the
MASTER
----------------------------------------------------------------------------
Mirror Status (MASTER) to (XXX.XXX.XXX.XXX [IP of slave]) live
Add: 7 (0.0/s) live=0
Sent: 0 (0.0/s)
Queue: 1395k 0.0%
Config: Feb 09 16:52:53
Open failed
State: Started 1
Que:
Info: 16:53 readline open Connection refused after 0 seconds
In: add=0 del=0 rename=0 fail=0 prune=0
----------------------------------------------------------------------------
Almost an hour after the above commands were given to the master, the
SLAVE shows this:
----------------------------------------------------------------------------
Mirror Status (SLAVE) to (XX.XX.XX.XX [IP of MASTER) live
Add: 0 (0.0/s) live=0
Sent: 0 (0.0/s)
Queue: 0k 0.0%
Config: Not since restart
Resync: No record of last resync command
State: Started 1
Que:
Info: 02:27 Open (XX.XX.XX.XX [IP of MASTER]) failed Operation now in
progress 33 sec
In: add=0 del=0 rename=0 fail=0 prune=0
----------------------------------------------------------------------------
Every time I repeat this, the time under "Info: " changes to the
current time for both the Master and Slave. Please disregard the wide
discrepancy in times - the machines are set to different time zones.
Any ideas as to why it is not starting?
Thank you.
Patrick
I believe that mirroring is done over tcp port 110. Could you have
firewall issues preventing them from talking on port 110? Can you telnet
to port 110 from the master to slave or vis-versa?
Lyle Giese
LCR Computer Services, Inc.
------------------------------------------------------------------------------------------
The problem with socialism is that you eventually run out of other
people's money.
------------------------------------------------------------------------------------------------------------------------
"More to the point, the survivors of previous disasters had learned to appreciate that war - with all its myriad convenient justifications for secrecy, taxation, conscription, and suppression of the troublesome indvidual - is, indeed "the health of the State." Thus it was arranged that victory and defeat should become eternally transitory." -- L. Neil Smith "Henry Martyn" (Tor Books, 1989, page 287)
Isn't any victory or defeat in the war on terrorism eternally transitory?
------------------------------------------------------------
Barack Obama's presidency is George W. Bush's third term!
|
