Thanks.  That did the trick!  It works now.

On Feb 20, 2011, at 1:15 PM, SurgeMail Support wrote:

> Hi,
> 
> Yeah looks like that port isn't open, you need to check it, like Vinny mentioned the fastest way would be to telnet to it.
> telnet ip 110
> If an ISP is blocking outgoing port 110 then you could use a different port also.
> 
> Just add a new port to the g_mirror_host setting
> eg
> 
> g_mirror_host "ip:port"
> 
> And then add the new port on the other server to the g_pop_port setting
> eg
> g_pop_port "110,new_port_for_mirror"
> 
> Let us know how you get on.
> 
> Regards,
> Stuart
> 
> On 18/02/2011 7:59 p.m., plear wrote:
>> 
>> Looking over the mirror log on the slave here is what I get - looks like
>> it's a one way street and looks like the firewall may be blocking
>> something. Port 110 is open. Are there any other ports that mirroring uses?
>> 
>> 18 03:41:01.00:-1225409648: mirror: open (<Master IP address>) waiting
>> for 20 seconds for retry
>> 
>> 18 03:41:01.00:-1225409648: mirror: Unable to open Open (<Master IP
>> address>) failed Operation now in progress 33 sec
>> 
>> 18 03:41:21.00:-1225409648: mirror: open (<Master IP address>)
>> 
>> 18 03:41:55.00:-1225409648: mirror: open failed2 (Open (<Master IP
>> address>) failed Operation now in progress 34 sec)
>> 
>> 18 03:41:55.00:-1225409648: mirror: open failed and took 34 seconds,
> 


------------------------------------------------------------------
"Political Correctness is a doctrine, fostered by a delusional, 
illogical minority, and rabidly promoted by an unscrupulous mainstream 
media, which holds forth the proposition that it is entirely possible to 
pick up a turd by the clean end."
---------------------------------------------------------------