Thanks Lyle,

I opened Port 110 on both ends.  Now I get the following:

(I'm trying to mirror two machines over the internet.)  SSL is NOT disabled on either machine.  Port 110 is open in both directions.  

Mirror Status (MASTER) to (<SLAVE IP>) live 

 Add:      61  (0.0/s) live=0

 Sent:     67  (0.0/s)

 Queue:    0k  0.0%

 Config:   Feb 16 15:24:53

 Resync:   Total=22151 0.0, Resent=9840, Prune=0, Dirs=286 Th=5

 State:    OpenList2-NULL

 Que:    Done que 2 in 4 sec

 LastErr: -ERR SSL Not allowed for ip (<MASTER IP>)

 In:       add=0 del=0 rename=0 fail=0 prune=0

Mirror Status (SLAVE) to (<MASTER IP>) live 

 Add:      2  (0.0/s) live=0

 Sent:     0  (0.0/s)

 Queue:    0k  0.0%

 Config:   Feb 17 00:25:41

 Resync:   No record of last resync command

 State:    Started 1

 Que:    

 Info:     08:22 Open (<MASTER IP>) failed Operation now in progress 33 sec

 In:       add=9379 del=136 rename=45 fail=13 prune=0

Thank you.

Patrick

On Feb 9, 2011, at 7:23 PM, Lyle Giese wrote:

plear wrote:

Hi,

Mirroring won't start.  I get an "open connection refused" on the master.  Here is the detail:

I have set up both the master and slave per http://netwinsite.com/surgemail/help/mirror.htm and started the mirror (on the master only) as follows:

issue "tellmail resync_config" on master (if using g_mirror_config)

issue "tellmail surgehost_update" on master

issue "tellmail resync_nwauth"' on master (if using nwauth)

issue "tellmail resync_fast" on master

When I issue the "tellmail status" command I get the following on the MASTER

----------------------------------------------------------------------------

Mirror Status (MASTER) to (XXX.XXX.XXX.XXX [IP of slave]) live

Add:      7  (0.0/s) live=0

Sent:     0  (0.0/s)

Queue:    1395k  0.0%

Config:   Feb 09 16:52:53

Open failed

State:    Started 1

Que:    

Info:     16:53 readline open Connection refused after 0 seconds

In:       add=0 del=0 rename=0 fail=0 prune=0

----------------------------------------------------------------------------

Almost an hour after the above commands were given to the master, the SLAVE shows this:

----------------------------------------------------------------------------

Mirror Status (SLAVE) to (XX.XX.XX.XX [IP of MASTER) live

Add:      0  (0.0/s) live=0

Sent:     0  (0.0/s)

Queue:    0k  0.0%

Config:   Not since restart

Resync:   No record of last resync command

State:    Started 1

Que:    

Info:     02:27 Open (XX.XX.XX.XX [IP of MASTER]) failed Operation now in progress 33 sec

In:       add=0 del=0 rename=0 fail=0 prune=0

----------------------------------------------------------------------------

Every time I repeat this, the time under "Info: " changes to the current time for both the Master and Slave.  Please disregard the wide discrepancy in times - the machines are set to different time zones.

Any ideas as to why it is not starting?

Thank you.

Patrick

I believe that mirroring is done over tcp port 110. Could you have
firewall issues preventing them from talking on port 110? Can you telnet
to port 110 from the master to slave or vis-versa?

Lyle Giese
LCR Computer Services, Inc.

------------------------------------------------------------------------------------------

The problem with socialism is that you eventually run out of other people's money.

The College of New Caledonia
Visit us at http://www.cnc.bc.ca
Virus scanning is done on all incoming and outgoing email
Anti-spam information for CNC can be found at http://gateway.cnc.bc.ca