This page is out of date, please use our new website https://surgemail.com
SurgeMail supports external authentication modules which are simple command line based programs that understand a small set of commands to add, remove and look up user details in your user database.
We provide modules for most common databases, including:
We also have a few utilities for running the above modules in different ways, including:
All of these modules can be found here along with instructions on how each can be configured.
Of course, you can also write your own here is the protocol definition.
Authent modules should always be tested at the command line to see if they are working. Here is an example using NWAuth, the standard NetWin module:
c:> nwauth set bob@test.com bob +OK bob@test.com added to database lookup bob@test.com +OK bob@test.com config 0 check bob@test.com xxx -ERR bob@test.com password wrong or not a valid user search bo*@test.com +DATA bob@test.com +DATA bobcat@test.com +OK Search Complete 2 items found out of 1510 set bob@test.com bob quota="200" fwd="fred@test.com" +OK bob@test.com added to database lookup bob@test.com +OK bob@test.com config 0 quota="200" fwd="fred@test.com"
The web admin GUI will list available authent modules and guide you to the config pages for each authent module. Most authent modules have an ini file that needs to be configured, eg: odbcauth.ini or ldapauth.ini and a related binary.
When you download an authent module all files should be placed in the SurgeMail directory.
Again, test the authent module at the command line before telling SurgeMail to use it!!
Normally you configure the authent module through the admin interface, but if you find yourself editing the surgemail.ini by hand ensure you pass the -path command line parameter to the authent module, this is to tell it where to find its config file and any other files it might use, for example:
g_authent_process "c:\surgemail\nwauth.exe -path c:\surgemail"
The above tells NWAuth to look
in c:\surgemail for it's files nwauth.add, nwauth.txt, etc.
The same is true for any module that has an .ini file.
If you're authent module is not working this is the most likely cause.
SurgeMail uses the g_authent_info settings to define what fields it displays and where. Most fields have a 'hard-coded' use but others are simply there as examples of the kind of optional information you can collect about your users. The default settings are as follows:
Each field is used for a different purpose:
allow | Services the user can access eg. SMTP,POP,IMAP. |
created | Record of creation time, stored on creation time. |
ddfrom | Private email 'from' suffix. |
ddpriv | Private email 'private' suffix. |
enotify | The email address to send email notifications to. |
friends | 'true' if the user has a friends mode configured. |
full_name | Example information about user (not required, example). |
fwd | Forwarding rules for the user, configured via users "Forwarding" page. |
mailstatus | Status of the account, see (account status) |
pass_question | Only used at creation time, collects password retrieval question (not stored in database). |
pass_answer | Only used at creation time, collects password retrieval answer (not stored in database). |
phone | Example information about user (not required, example). |
quota | Users disk quota, configured via the admininstrative interface. |
spf_block | 'true' if the user wants to block non spf compliant email. |
For example:
+OK bob@test.com config 0 fwd="fred@test.com" +OK bob@test.com config 0 quota="200000" fwd="joe@xx.com"
Advanced settings :
alias_quota | Number of aliases this user can create |
admin_access | Features this domain admin can access |
ccname | Credit card holders name. |
ccnumber | Credit card number. |
ccexpires | Credit card expiry date mm/yy. |
ccciv | Credit card security code. |
cctype | Credit card type eg. Visa, Amex |
disabled | Used by email based account creation code (may also be used to disable existing accounts) |
list_quota | Quota of mailing lists the user can create. |
mailaccess | Used in conjunction with g_access_group and g_user_access to specify access to features. |
realuser | Real account to which this account is aliased - allows aliases to be specified in authent database |
send_limit | Number of outgoing messages this user can send per 30 minutes. You must also define the global limits g_tarpit_max, and g_tarpit_max_remote. And you may want to set g_tarpit_drop "true" |
smsto | SMS phone number to send SMS nontifications to users "SMS" page. |
tohost | The host which to connect to when using proxy mode (g_proxy) |
user_access | Features this user can access |
Legacy settings :
accountstatus | Numeric equivalent of mailaccess |
droppath | The user's drop path, this is no longer supported and will not work with all SurgeMail functionality. |
groups | Example setting used to be installed for default SurgeMail installs |
SurgeMail will lowercase domains in all cases, and for usernames and passwords entered in mixed case it will attempt a lookup 'as is' and then a second one using lowercase, this helps avoid problems with users accidentally mixing case.
In all cases drop paths etc are created using lowercase as this avoids the terrible mess on UNIX that can occur. This does mean it is impossible to have two different users who are only distinguished by case. This is of course an intentional feature and not a bug. We think anyone who actually wants multiple users with the same name is a little crazy :-)
This is an example of how to configure LDAPAuth for SurgeMail such that the user must enter a first and last name upon creation. This is how you might configure it for use with the Thunderbird LDAP client.
First, in ldapauth.ini add/change:
info_fields full_name cn
info_fields firstname givenName
info_fields lastname sn
and remove:
must_set_fields sn name
must_set_fields cn name
Next, in surgemail.ini configure:
g_authent_info name="First Name" field="firstname" access="user"
g_authent_info name="Last Name" field="lastname" access="user"
and for each domain configure:
create_reqd "firstname,lastname"
Then stop and restart the surgemail process. Users will now see two fields additional on the self creation page "First Name" and "Last Name" the data entered here will be stored in the LDAP fields specified "givenName" and "sn" and Thunderbird will use these values.
Example config used with ActiveDirectory (Windows)
ldap_host 10.1.1.1
ldap_port 389
ldap_mgr_dn cn=ftpadmin1,ou=mgt_info_sys,ou=CTL,ou=region_sales,dc=example,dc=com
ldap_mgr_pw secret_password
ldap_search_base OU=region_sales,dc=example,dc=com
ldap_scope LDAP_SCOPE_subtree
ldap_search_name ExampleAccountName
ldap_group_base OU=region_sales,dc=example,dc=com
ldap_group_search CN=&*
ldap_group_field CN
ldap_group_attrib member